If you're riding a Rawrr Mantis and looking for the cleanest way to haul it, a hitch carrier beats truck beds and cargo vans every time - no ramps on every trip, no scratched paint, no rearranging your whole vehicle.
The Charge Carrier fits the Rawrr Mantis. Here's everything you need to know before your first haul.
Compatible Models
- Rawrr Mantis
How the Charge Carrier Mounts Your Mantis
The Charge Carrier uses a Secure Anchor Bolt System that locks directly through your bike's foot pegs. Unlike ratchet strap-only carriers, the bike stays planted - no shifting on the highway or off-road.
Three adjustable brackets ship with the carrier (two leveling, one flat), giving you 20 adjustable bracket positions to dial in. The Mantis mounts using the leveling brackets to keep it sitting level on the carrier.
Kickstand Sensor
If your Mantis is equipped with a kickstand sensor, the Charge Carrier's height adjustment lets it sit level on the rack without stressing or tripping the sensor - no bypass or modification needed.
Hitch Requirements
Receiver size: 2 inch
Hitch class: Class III, IV, or V
Carrier weight: 22 lbs
Weight capacity: 400 lbs
Check your vehicle's tongue weight rating before loading. The Mantis comes in at roughly 110 lbs dry, so it fits well within the carrier's 400 lb capacity.
Hauling Two Mantises
The Charge Carrier Add-On expands your setup to carry two bikes on the same hitch.
Weight capacity (dual config): 200 lbs per bike
The Add-On connects using connector plates and four bolts - on or off in a few minutes.
Storage Between Rides
Smart Storage Mode flips the carrier vertically against your vehicle when not in use. It stays installed between sessions without sticking far out on your vehicle.
Shop the Charge Carrier
Ready to haul your Rawrr Mantis? Everything you need is below.
